Pellet Stove Furnace
Pellet stoves can be purchased as freestanding units or fireplace inserts that can give your home the appearance of a traditional fireplace with wood burning. These stoves are available in freestanding models or as fireplace inserts. They can provide the appearance of an old-fashioned wood-burning fire.
The auger moves the pellets out of the hopper to the combustion chamber which is where they burn and produce heat. Sensors monitor the fire and can alter the rate of operation to ensure your desired temperature in the room.
1. Energy Efficiency
Pellet stoves burn a sustainable non-toxic fuel composed of compressed sawdust wood chips, bark and other materials normally put in landfills, but can be repurposed into a clean and efficient source of heating. They help homeowners reduce their energy usage, and therefore greenhouse gas emissions. Many pellet stove owners have reported that they've recouped their initial investment in just a few years through lower heating bills.
Pellets are stronger and more compressed than natural wood, making them more efficient to burn. They also produce less creosote buildup than traditional wood-burning fireplaces. Additionally, they are packaged in plastic bags that seal out moisture and need less frequent cleaning.
Like other heating systems, pellet stoves need to be properly sized and vented. A professional technician can evaluate your venting needs and space requirements to ensure the most efficient results.
In the process of installation, the hearth is built to size and the vent is fitted through a hole that has been cut in your home's siding. The vent may be installed through a roof or sidewall depending on your preference and local laws.
When the vent and hearth are complete and the stove is ready to be connected and turned on. Certain manufacturers provide a remote control that makes starting and maintaining the fire simple, while others have additional sensors that monitor combustion, airflow, flue temperature, and pressure. If the system determines that it requires more or fewer pellets, it will signal the auger to accelerate or slow down in line with the need.
All stoves come with a hopper which can hold between 35 and 130 pounds of pellets. The size of the hopper determines the frequency at which you have to replenish your stove. Larger hoppers allow for longer periods before refills is needed. A grille pulls air from the room, passes it over the heat exchanger and blows heated air through the living space via convection. A auger, grate or any other device distributes pellets, and a pan below will collect any pellets that are not burned as well as combustion leftovers.
Pellet stoves are more energy-efficient than wood-burning stoves, but they are not as efficient as natural gas or electric furnaces. The electric components that drive their motorized components require electricity, which could be problematic during an power failure, but backup systems are readily available for batteries and generators.
2. Low Maintenance
Pellet stoves are extremely efficient, however, like any other major heating appliance, they require a bit of maintenance to ensure that they function properly. Cleaning your stove and exhaust vent regularly will prevent the buildup of harmful creosote, which could cause a fire or explosion that could cause damage to your stove or even your home.
modern pellet stove compressed natural particles (such as nutshells, kernels of corn, or small pieces of scrapwood) made from wood or other substances. An electric auger is used to feed the pellets from a fuel container into the burner and into the combustion chamber. The rate at which the pellets are pumped into the burner is controlled by the thermostat you set. The fire can continue to roar or decreased or even extinguished depending on the temperature you set. When the fire is out, the ash is dropped into an empty ash tin beneath the burner that can be easily removed and disposed.
Pellets are made from waste products that would have been thrown away when processing lumber. They are a renewable source and emit less particles than traditional wood-burning appliances making pellet stoves a cleaner heat source. The amount of carbon monoxide, carcinogens, and other harmful chemicals that are released from pellet stoves are also less than the latest EPA certified wood stoves.
Due to the low emissions they produce, these stoves don't require to be vented through chimneys as traditional wood stoves, but should be properly vented through a wall or other exterior structure. Pellet stoves have flue ports at the rear or top of the appliance. They are connected to a ventpipe which extends outside the home.
One drawback of pellet stoves is that you must purchase or store enough pellets to last the winter season. Pellet stove owners typically consume three tons of wood pellets each winter, at a cost of $200 per ton. The expenses can add up, but they are less expensive than buying firewood and then hauling it away for a fireplace or wood-burning stove. Make sure you buy enough pellets to ensure that your stove will last through the coldest winter months, and that you have a suitable space to store the pellets (preferably dry, cool and away from the ground).
3. Reduce Carbon Footprint
Pellet stoves generate heat using renewable biomass fuels, reducing the dependence on fossil fuels that are finite. This contributes to a reduced carbon footprint and helps diversify the sources of energy used in homes.
Even the newest woodstoves that are EPA certified emit significantly less than pellet stoves. The emissions from pellet stoves are significantly lower than the ones from gas furnaces. miniature pellet stove are made from sawdust and bark as well as other wood remnants. They could also include soybeans, corn, or agricultural waste. When they are burned, they release less particulates (leading to respiratory issues and allergies), carcinogens and carbon monoxide as well as nitrous oxides.
The primary difference between a wood stove and a pellet stove is the feed system. Pellet stoves have hoppers to hold the pellets. When the thermostat or sensors indicate that the room requires heating, the auger is turned and the pellets are fed into the combustion chamber, where they burn and generate heat. The combustion chamber moves through a heat exchanger, which transmits the heat to the blower and then out into the room. This process produces very low emissions, and creosote is not produced.
After the hopper has been empty, the ash gets removed by a cyclone and it is then deposited into an ash container. The stove also has an air circulator to move the clean, heated air throughout the living area. The majority of pellet stoves require little maintenance and feature a large viewing space for you and your loved ones to relax and enjoy the flames.
The main factor that influences emissions from stoves made of pellets is the quality of the pellets. Poor-quality pellets produce more emissions. When selecting your pellets ensure they're certified to meet certain standards and don't contain other ingredients, such as petroleum-based or urea-based products. Also look for a company that offers a guarantee and will repair or replace parts in case of a problem. If you want to take an environmentally friendly approach certain states permit homeowners to get a tax credit when installing pellet stoves. This is a great opportunity to reduce the initial cost of this kind of stove and make it easier to install.
4. Reduced Noise
Pellet stoves emit very little smoke or exhaust when compared to fireplaces that burn wood. A fan is used to spread heat more evenly throughout the room. This is a major reason why pellet stoves require less maintenance than wood stoves. While wood stoves require frequent cleaning of chemical residues and particles to prevent their deterioration stoves can be cleaned by an electric vacuum cleaner.
Many manufacturers have made an effort to design their stoves to be easy to set up and to operate as well as maintain. Their appliances are available in various styles that complement the design of your home. Some models come with programmable thermostats and remote control as well as a WIFI apps that let you manage and monitor your stove from any location in the world.
The majority of pellet stoves have a large fuel hopper which can hold 35 to 130 pounds of pellets. The pellets are then fed into the combustion chamber via an auger. The output of heat and the level at which the fire will get is determined by the speed at which pellets are fed into the burner. The hopper can either be filled with hardwood pellets made from dense wood species such as oak and hickory or softwood pellets. Many stoves can even use alternative biomass pellets, like those made from switchgrass or corn which are environmentally friendly alternatives.
Because pellet stoves use as a clean fuel, they emit less smoke than traditional wood-burning fireplaces and require fewer maintenance. They also don't require a chimney, which makes them a better choice for new construction or retrofits.
In contrast to wood stoves, which require regular maintenance to be cleaned of creosote and other chemicals, pellet stoves only require periodic inspections to ensure proper operation and maintenance. This could involve regular cleaning and inspection of the ash or "clinker" as well as the fans and motors according to the model. The dealer of your appliance can explain the proper procedure for your specific model and brand. They can also provide details regarding storage and safety, and assist you in finding the correct fuel for your stove.